What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Just about everyone is bound to have their unique opinion on the subject of What Would Cause My Electric Water Heater to Stop Working?.
Many modern residences use an electric water heater for their heating system, as a result of its comfort and convenience of use. Nevertheless, just like any other electrical home appliances, problems might occur with its usage, unexpectedly. It can be truly irritating to get up to a cool shower as opposed to a hot one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case might be, hot water heater problems can be rather nerve-racking. The good news is, we have actually made a list of feasible options to your hot water heater problems. There are a number of variables that could create most of these problems, maybe a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the problem is, getting it taken care of should not pose way too much of a concern if you comply with these steps:
Inspect Your Power Supply:
As standard as this may seem, it is very needed. Without adequate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just turn it off and on once again. Replace any damaged or damaged fuse. Test the device with power after these modifications to see if it's now working.
Examine the Burner in the Water Heater:
If it's not a power problem, after that attempt having a look at your heating element if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any one of them is damaged, change that component and then check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature level setups on your top thermostat. Ensure the breaker is switched off before doing anything. Open the gain access to panel as well as press the red button for temperature reset over the thermostat. This must aid warm the water. Transform the breaker back on and check if the problem has been fixed.
Call An Expert:
If after replacing all defective parts as well as resetting your temperature, the hot water heater still isn't functioning, you might need to call a professional plumber for an expert viewpoint. The problem with your heater could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of warm water needed in your home. Whatever the case may be, a professional plumber would aid address the problem.
Conclusion
Hot water heater problems are not constantly major. Most of them are because of minor problems like a blown fuse or worn-out heating element. Changing the damaged components must work. However, if you are still incapable to address the trouble, give a call to your nearby plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid person who reads about Hot Water Heater Repair, I thought sharing that piece of writing was really helpful. Liked our posting? Please share it. Help others discover it. Thank you for your time. Visit us again soon.
Request An Appointment
Report this page